Universal Remote Complete control Manual de usuario descargar pdf (Pagina 27)

Complete Control Mobile Programming Manual for MX-iOS

9 First, turn the TV and the Receiver to the wrong input, then turn off everything in the theater.

Point the connected MX-iOS at the system. Select the first step in the list by clicking on it. Now,

click on the Test button. Observe the television and the receiver. Did they both switch to the

correct input?

10 Programming additional delay in the macro is sometimes necessary. Each macro step usually

takes some time, so there may be enough built in delay for the television and the receiver to both

be fully active by the time the input commands are sent. Sometimes the component is not fully

awake. It is fashionable for many modern televisions and receivers to require 5 or more seconds of

warm up time before they are responsive to new commands. In a case like that, you will need to

add more delay between steps.

11 Select the Delay icon. Now, click on the preset amount of delay or enter any time between .1 sec-

ond and 30 seconds in the delay setting window.

12 The new step appears in the list. Now, drag the delay step to the correct location.

13 Again, turn the TV and the Receiver to the wrong input, then turn off everything in the theater.

Point the connected MX-iOS at the system. Select the first step in the list by clicking on it. Now,

click on the Test button. Observe the television and the receiver. Did they both switch to the

correct input? Continue to revise the macro with delays or changes in order and test until the

macro ALWAYS correctly turns everything on and

switches the surround sound receiver and

television to the correct input. When the macro

is perfect, click on the Save in the File Menu.

Sometimes a change in order can

provide the delay you need.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32

Sin comentarios

Universal Remote Complete control Manual de usuario Pagina 27