Universal Remote CAM-DC-I Instrucciones de operaciones descargar pdf (Pagina 21)

Part 3 - Remote Setup

• Use FEN is a feature that allows you to register a

unique name for a camera that utilizes a dynamic

IP address to the FEN Server and connect to the

camera using the registered name instead of an IP

address, which can change from time to time. In

order to use this feature, you must first register a

camera name to the FEN Server.

• If network settings have been changed, click OK

at the bottom of the setup window to save the

changes and then setup the FEN.

• Inquire with your network administrator for the

FEN Server's IP address or domain name. If a

DNS server has been configured under Network

setup, you can enter the FEN Server's domain

name instead of its IP address for the FEN Server

setting.

• If using an IP router (or NAT), port configuration

and other network functions will depend on the

usage method of the IP router (or NAT).

• You will not be able to save FEN settings unless

you click on the OK button next to the Camera

Name field and check the entered name's

availability. In addition, you will be prompted with

an error message if you do not enter a camera

name or enter a name already registered to the

FEN Server. If the camera name contains the #, \,

and/or % symbol, it might not be able to connect

to the camera from the IDIS Web program.

The FEN Server operated by IDIS is a service to its

clients and may go offline without notice for server

update purposes or due to an unexpected failure.

Port/QoS

• Use/Port: Enable/disable ports and designate

corresponding port numbers. Admin, Watch, and

Record ports are enabled by default and cannot be

disabled. By enabling IDIS Web and RTSP ports,

you will be able to use the IDIS Web program or

a media player that supports RTSP (Real-Time

Streaming Protocol) service to connect to the

camera. If this option has been changed, Remote

Setup will terminate after applying the current

settings. (Applicable to Admin port number only.)

• DSCP: Designate each port's QoS (Quality of

Service) level using DSCP values. Assigning QoS

levels prioritizes the ports for network bandwidth

use. Higher the DSCP value, higher the QoS level

and thus higher on the network bandwidth allocation

priority list. Use 0 if you do not want to assign a QoS

level. The network environment must support DSCP

in order for this feature to function properly. Contact

your network administrator for more details.

• Use HTTPS: Select this option to apply https

protocol-based security on IDIS Web.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 48 49

Comentarios a estos manuales

Sin comentarios

Universal Remote CAM-DC-I Instrucciones de operaciones Pagina 21

Comentarios a estos manuales

Relacionado con productos y manuales para Cámaras De Seguridad Universal Remote CAM-DC-I